Toshiba TLP-ET1U 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Toshiba TLP-ET1U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-ET1U 50 페이지. 3lcd projector

Operations

Turning the power on and off (Continued)

Turning the power on

You can prevent the projector's power from being turned on accidentally.

Set the safety lock switch on the bottom of the main unit to ON.

In standby mode with the safety lock switch set to ON, the ON indicator lights in orange

and in green alternately.

Once you have set the safety lock switch to ON, you have to hold down the ON/

STANDBY button for at least two seconds to turn on the power of the projector. Other

operations are the same.

Press the ON/STANDBY button.

Remote control Control panel

• Do not look into the lens during operation. Doing so could damage your vision.

• Families with children should be particularly careful.

• Do not block the air intake or exhaust. Doing so could cause a fire due to

internal overheating.

• Do not place your hands, face, or other objects near the air exhaust. Doing

so could cause burns or deform, discolor, or break the object.

Notes

• The startup screen will disappear after a moment. You can dismiss the startup

screen before this by performing any operation.

• After the startup screen disappears, the language menu is displayed when you

use the projector for the first time after purchase. (See

• Turning the power on starts the cooling fan running with operating sound.

The power is turned on, and three (ON,

LAMP, and FAN) indicators come on in

green. After a moment, the startup screen

appears.

LAMP

TEMP FAN

(Green)

Lit

p.20.)