Dimplex BLF7451 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Dimplex BLF7451에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451 19 페이지.
Dimplex BLF7451에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)

페이지 인쇄

1. Operation

Fireplace Installation

Site Selection

Review and consider all of the

following conditions before instal-

lation:

• Dimensions of the unit: 74.1 in.

(1883 mm) x 19.4 in. (494 mm)

• For surface installation, the unit

requires a minimum of 2 wall

studs in order to ensure secure

installation. For other installa-

tion methods, suitable framing

is required.

There are two possible mounting

methods:

• Surface mount (pg. 10);

• Flush mount (pg. 11).

NOTE: If the desired fireplace

location is on the interior of an ex-

terior wall the unit should only be

surface mounted. If an in-wall or

flush mount look is desired build

the interior wall out into the room.

NOTE: A dedicated, properly

fused 15 Amp circuit is re-

quired, rated for the appropri-

ate voltage (120V, 240V).

WARNING: Construction and

electrical outlet wiring must

comply with local building

codes and other applicable

regulations to reduce the risk

of fire, electric shock and injury

to persons.

WARNING: To reduce the risk

of fire, do not store or use gaso-

line or other flammable vapors or

liquids in the vicinity of the heater.

1. Select a location that is not

susceptible to moisture and

is away from drapes, furniture

and high traffic.

2. Unpack the fireplace, front

glass and hardware from the

box and remove all packaging

Figure 2

Screws

Electrical Cover Bracket

Figure 3