Dimplex BLF7451 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Dimplex BLF7451에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451 19 페이지.
Dimplex BLF7451에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)

페이지 인쇄

1. Operation

Fireplace Installation

unit to the live wire from the

power supply.

• Connect the N and H1 wires

from the unit to the neutral

wire from the power supply.

• Connect the L2 and H2 wires

together, with a wire connec-

tor and leave them discon-

nected from everything.

• Attach the grounding wire to

the cover with the provided

grounding screw. Place wire

in-between screw and lock

washer and tighten (Figure 4).

• Reposition the electrical cover

brackets over the wires and

connectors and attach to fire-

place chassis using the screw

removed in step 1 and step 3.

For 240V Installations

Use three conductor, non-metallic

sheath cable with ground wire

(4 wires total) for the incoming

power supply on fireplace inserts.

CAUTION: Use the appropri-

Figure 4

Hole for

Ground Screw

ate wire to meet local and

national electrical codes for

rated power consumption.

• Connect the L1 wire from the

unit to the L1 wire from the

power supply.

• Connect the L2 wire from the

unit to the L2 wire from the

power supply.

• Connect the N wire from the

unit to the neutral wire from

the power supply.

• Connect the H1 and H2 wires

together, with a wire connec-

tor and leave them discon-

nected from everything.

• Attach the grounding wire to

the cover with the provided

grounding screw. Place wire

in-between screw and lock

washer and tighten (Figure 4).

• Reposition the electrical cover

brackets over the wires and

connectors and attach to fire-

place chassis using the screw

removed in step 1 and step 3.

For Bathroom Use

If this unit is installed in a bath-

room it must be protected by a

GFI receptacle or circuit. If recep-

tacle is used it must be readily

accessible.