Dimplex BLF7451 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Dimplex BLF7451에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451 19 페이지.
Dimplex BLF7451에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)

Fireplace Installation

washers into the wall and/or

wall anchors.

6. Install the bottom support

bracket to the wall centered

with the wall mounting bracket,

using the appropriate mount-

ing hardware, 13 ¾" (350

mm) below the wall mounting

bracket. (Figure 5)

7. Remove the center screw from

the bottom of the fireplace.

(Figure 6)

8. Hang the fireplace from the

bracket.

9. Install the removed screw

through the bottom support

bracket into the fireplace.

10. Refer to Front Glass Installa-

tion section final installation

procedures.

Figure 7

2 x 8 Framing

Flush Mounted Installation -

2x8 Framing

CAUTION: Two people will be

required for various steps of

this procedure.

1. Prepare a wall with a framed

opening of 73 in. (185.4 cm)

wide x 18 ½ in. (47 cm) high

(Figure 7).

NOTE: It is recommended

that the bottom of the unit not be

mounted higher than 40 in.

(102 cm) from the ground to main-

tain an optimized viewing angle of

the flame.

WARNING: Do not attempt

to wire your own new outlets or

circuits. To reduce the risk of fire,

Figure 8

Wall

surface

Mounting hole