Dimplex BLF7451 Kullanıcı El Kitabı - Sayfa 11

Isıtıcı Dimplex BLF7451 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dimplex BLF7451 19 sayfaları.
Ayrıca Dimplex BLF7451 için: Servis Kılavuzu (16 sayfalar)

Sayfayı Yazdır

1. Operation

Fireplace Installation

washers into the wall and/or

wall anchors.

6. Install the bottom support

bracket to the wall centered

with the wall mounting bracket,

using the appropriate mount-

ing hardware, 13 ¾" (350

mm) below the wall mounting

bracket. (Figure 5)

7. Remove the center screw from

the bottom of the fireplace.

(Figure 6)

8. Hang the fireplace from the

bracket.

9. Install the removed screw

through the bottom support

bracket into the fireplace.

10. Refer to Front Glass Installa-

tion section final installation

procedures.

Figure 7

2 x 8 Framing

Flush Mounted Installation -

2x8 Framing

CAUTION: Two people will be

required for various steps of

this procedure.

1. Prepare a wall with a framed

opening of 73 in. (185.4 cm)

wide x 18 ½ in. (47 cm) high

(Figure 7).

NOTE: It is recommended

that the bottom of the unit not be

mounted higher than 40 in.

(102 cm) from the ground to main-

tain an optimized viewing angle of

the flame.

WARNING: Do not attempt

to wire your own new outlets or

circuits. To reduce the risk of fire,

Figure 8

Wall

surface

Mounting hole