3Com 7250 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} 3Com 7250에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 7250 9 페이지. Converting to managed access point operation
3Com 7250에 대해서도 마찬가지입니다: 데이터시트 (4 페이지), 전환 매뉴얼 (10 페이지)

페이지 인쇄
3Com 7250 빠른 시작 매뉴얼
If you have routed the Ethernet cable through the center opening, secure the cable on the
hook located on the mounting plate as shown in the illustration below.
2
Connect the Ethernet cable to the Ethernet port on the access point.
3
Connect the power cable to the power port on the rear panel of the access point.
4
Position the access point at an angle to the mounting plate bayonet connection and turn the
unit clockwise until it snaps into place, as shown below.
Top opening
Center opening
6

Flat Surface Installation

1
Find a clean and dry surface that is elevated enough to provide good reception and coverage
for the network. Do not place the access point on a metal surface.
2
Make sure to choose a location where the access point will not be disturbed.
3
Connect the Ethernet cable into the Ethernet port.
4
Connect the power cable to the power port on the rear panel of the access point.
5
Set the access point down on a flat, level surface.
Hook for securing
the cable
Align with mounting plate
and rotate clockwise to lock
6