aeolus AEOLIAN TD-901GT 소유자 매뉴얼 - 페이지 3

{카테고리_이름} aeolus AEOLIAN TD-901GT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aeolus AEOLIAN TD-901GT 4 페이지. Pet dryer

페이지 인쇄

A dryer we have nothing else to entitle but

The wind speed and blow force is dramatically different in single motor and dual motor dryers.

As powerful as our TD-901T Cyclone single motor dryer is, it can't compare to our Dual Motor Hercules

TD-900XT. Hercules double motor dryer measures 955g of blow force; 605g for Cyclone.

Our aim was to create a single motor dryer that bridged the gap. We worked on this for a few years, and

in 2012 the problem was solved. We created an incredibly powerful single motor dryer which can even

match Hercules in both wind speed and blow force.

Thus the aptly named AEOLIAN was created.

Super Blow Force

895g

of super blow force, is what AEOLIAN produces. No other single motor dryer comes close Most

①

dual motor dryers in the market perform at the average level of 780 -850g blow force, which to say

Monster has already beaten them and just slightly less forceful than our own double motor dryer, Hercules

(TD-900XT).

90m/s

is a new level of performance in this field.

②

Better Mobility

It is a AEOLIAN of performance in a compact, lightweight body. 6kg (even more), this 4.7kg portable

single dryer is the ideal choice for all. There are two options for flexibility of use; a stand and wall mount.

They both provide hands free usage and leave the work space free for grooming.

Motor Life Span

The enlarged surface area of the 32mm carbon brush helps to extend the lifespan by 20%. The bigger

motor (with stronger torque and slower rotation speed) generates much more wind volume than average

motors do; (and helps to extend its own life by rotating less).

Maintenance

IIf you compare AEOLIAN with a dual motor dryer, you will find you are saving labor cost, time and money

on the maintenance of AEOLIAN. One pair of carbon brushes need to be changed after about 800 service

hours (rather than 2 pairs as on a dual motor dryer). Much Simpler internal structure and less wiring

translate to less time devoted to maintenance.

Noise Control

As strong and powerful as the AEOLIAN is, it remains remarkably quiet.

It's only 79dbA when noise dosimeter is positioned above Monster.

Safety Performance

The USA produced temperature switch, cuts the heating element of the TD-901GT in 25ms, and begins

working again after the core temperature of the heating element reduces to 85 degrees Celsius, which

allows the TD-901GT to perform at an output temperature of a maximum of 52 degrees Celsius

TD-901GT has high temperature resistant silicone wiring, switch and circuit boards. The emergency cut

off switch responds readily if perchance a motor were to overheat.

Ease of Use

AEOLUS TD-901GT has a proprietary easy use nozzle attachment which allows the operator to remove

the nozzle head with the use of just one finger, with a simple click of the attachment.

Aeolus TD-901GT nozzle allows reattachment of nozzle head with just one click.

Accessories

AEOLUS TD-901GT options include:

Wall mounting bracket

Groomers' third arm

Dryer Stand

Please check instruction manual for further details

Testing Condition:

All testing results are under condition of 220V-50Hz, using 2800W model.

1)2.5m long flexible hose, Φ16mm round nozzle, fixed above the high precision electronic scale at 220mm, record the blow force indication.

2)2.5m long flexible hose, Φ16mm round nozzle, fixed at the distance of 180mm to the center of wind cup, record the wind speed indication.

3)52℃ means the sensor fixed at the position of 3cm away from the end of round nozzle never takes a value higher than 52℃ in a 3 hours

continuous testing, when the environmental temperature is at 32℃.

Remarks: all the testing is executed on professional testing platforms.

Direction for Use

1. Plug the flexible hose to the front cap connector.

2. Plug in socket with right voltage, switch power on.

3. Adjust wind speed, turn on or off the heating switch and choose suitable nozzle according to your need.

4. Turn the wind speed knob back to Minimum, turn off the heating switch and then turn off the power switch

after usage.

5. Unplug the dryer from the mains, unplug the hose and nozzle, and put the machine and accessories back to

box.

Maintenance

1. Please clean the sponge filter by washing or air blowing, be sure to fix the filter again when it's dry.

2. Keep the surface clean and dry, and use a dry and soft cloth to clean the painted surface.

3. Wet cloth with neutral detergent and wipe to remove stubborn stains and dirt.

4. Use only mild neutral detergent.

5. When the carbon brushes run out, please renew the brushes following the guide line in this booklet or

consult with the professionals.

Correct Disposal of this product

③

This marking indicates that this product should not be disposed with other household wastes

throughout the EU. To prevent possible harm to the environment or human health from uncon-

trolled waste disposal, recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection systems or contact

the retailer where the product was purchased. They can take this product for environmental

safe recycling.

AEOLIAN

Circuit Diagram

Parameters

Product Name

AEOLIAN

TD-901GT

Rated Voltage

220V -240V/ 50Hz

110V -120V/ 60Hz

100V/ 60Hz

Blow Force

895g

726g

Rated Current

12.7A

19.1A

15A

Maximum Power

1500W

2800W

2100W

Maximum Wind Speed

①

90m/s

73m/s

Minimum Wind Speed

27m/s

Heating Power

600W

Maximum Temperature

52℃

(Environmental Temperature at 32℃)

Noise

79dbA

78dbA

(on back of the dryer at 1m)

Noise

86dbA

85dbA

(on top of the dryer at 0.5m)

Net Weight

4.75kg

4.1kg

Gross Weight

5.5kg

4.9kg

Product Dimension

340×160×210mm

(Flexible Hose not Included)

Packing Dimension

450×300×230mm

(L×W×H)

Class

Remarks:

①. We cannot find any anemoscope to measure the real wind speed of this TD-901GT dryer, between

the another single motor dryer CYCLONE in our line and TD-901GT.

1.The parameters are tested with 2.5m long flexible hose and Φ16mm round nozzle.

2.We may not publish formal notice in written form when the parameters changed after new improvements.

3.The manufacturing standards and testing stands subject to TOEX company standard: TXPS-ALPD-0901(T)-2012.

Safety Instruction

1. Pet dryer needs a single outlet which is at least 10A and has ground wire for itself. Please connect pet dryer

with a correct outlet and do not share with other appliances.

2. Before switch on or turn off the power every time, please adjust the wind and temperature to the lowest, this

can extend the lifetime of the machine.

3. Do not insert pins or any metal things into the clearance of the machine, otherwise that would be easy to get

an electric shock and short circuit.

4. Do not use a cloth or bag to stop the diffuser or foam filter; otherwise it would damage the machine.

5. If the machine has been used for some time and a malfunction occurs, you must ask the professional

person to repair it. Do not disassemble by yourself.

6. If the power cord is damaged, discontinue use and have repaired by a professional.

7. Please keep children away when you operate the machine.

8. Do not hit the housing with fierce shock or drop the machine from high, which will damage the frame and motor.

9. Cardiopath or people with pacemaker are forbidden to use this machine.

10. Please hold the nozzle and hose firmly before turning the machine on, or the hose may wiggle and cause injury.

11. Must plug hose into the front cap connector before turning the machine on.

12. It's strictly forbidden to touch the components in the front cap connector with hand or any other objects in

any situation.

13. Apliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

14. Children should be supervised to ensure that they do not play with the appliance.

15. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

MOT1

Not equipped in

SWT

SW2

100V model

VR2

SW1

VR1

DB3

TRIAC