aeolus AEOLIAN TD-901GT Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Сушилка aeolus AEOLIAN TD-901GT. aeolus AEOLIAN TD-901GT 4 страницы. Pet dryer
Печатать страницу
A dryer we have nothing else to entitle but
The wind speed and blow force is dramatically different in single motor and dual motor dryers.
As powerful as our TD-901T Cyclone single motor dryer is, it can't compare to our Dual Motor Hercules
TD-900XT. Hercules double motor dryer measures 955g of blow force; 605g for Cyclone.
Our aim was to create a single motor dryer that bridged the gap. We worked on this for a few years, and
in 2012 the problem was solved. We created an incredibly powerful single motor dryer which can even
match Hercules in both wind speed and blow force.
Thus the aptly named AEOLIAN was created.
Super Blow Force
895g
of super blow force, is what AEOLIAN produces. No other single motor dryer comes close Most
①
dual motor dryers in the market perform at the average level of 780 -850g blow force, which to say
Monster has already beaten them and just slightly less forceful than our own double motor dryer, Hercules
(TD-900XT).
90m/s
is a new level of performance in this field.
②
Better Mobility
It is a AEOLIAN of performance in a compact, lightweight body. 6kg (even more), this 4.7kg portable
single dryer is the ideal choice for all. There are two options for flexibility of use; a stand and wall mount.
They both provide hands free usage and leave the work space free for grooming.
Motor Life Span
The enlarged surface area of the 32mm carbon brush helps to extend the lifespan by 20%. The bigger
motor (with stronger torque and slower rotation speed) generates much more wind volume than average
motors do; (and helps to extend its own life by rotating less).
Maintenance
IIf you compare AEOLIAN with a dual motor dryer, you will find you are saving labor cost, time and money
on the maintenance of AEOLIAN. One pair of carbon brushes need to be changed after about 800 service
hours (rather than 2 pairs as on a dual motor dryer). Much Simpler internal structure and less wiring
translate to less time devoted to maintenance.
Noise Control
As strong and powerful as the AEOLIAN is, it remains remarkably quiet.
It's only 79dbA when noise dosimeter is positioned above Monster.
Safety Performance
The USA produced temperature switch, cuts the heating element of the TD-901GT in 25ms, and begins
working again after the core temperature of the heating element reduces to 85 degrees Celsius, which
allows the TD-901GT to perform at an output temperature of a maximum of 52 degrees Celsius
TD-901GT has high temperature resistant silicone wiring, switch and circuit boards. The emergency cut
off switch responds readily if perchance a motor were to overheat.
Ease of Use
AEOLUS TD-901GT has a proprietary easy use nozzle attachment which allows the operator to remove
the nozzle head with the use of just one finger, with a simple click of the attachment.
Aeolus TD-901GT nozzle allows reattachment of nozzle head with just one click.
Accessories
AEOLUS TD-901GT options include:
Wall mounting bracket
Groomers' third arm
Dryer Stand
Please check instruction manual for further details
Testing Condition:
All testing results are under condition of 220V-50Hz, using 2800W model.
1)2.5m long flexible hose, Φ16mm round nozzle, fixed above the high precision electronic scale at 220mm, record the blow force indication.
2)2.5m long flexible hose, Φ16mm round nozzle, fixed at the distance of 180mm to the center of wind cup, record the wind speed indication.
3)52℃ means the sensor fixed at the position of 3cm away from the end of round nozzle never takes a value higher than 52℃ in a 3 hours
continuous testing, when the environmental temperature is at 32℃.
Remarks: all the testing is executed on professional testing platforms.
Direction for Use
1. Plug the flexible hose to the front cap connector.
2. Plug in socket with right voltage, switch power on.
3. Adjust wind speed, turn on or off the heating switch and choose suitable nozzle according to your need.
4. Turn the wind speed knob back to Minimum, turn off the heating switch and then turn off the power switch
after usage.
5. Unplug the dryer from the mains, unplug the hose and nozzle, and put the machine and accessories back to
box.
Maintenance
1. Please clean the sponge filter by washing or air blowing, be sure to fix the filter again when it's dry.
2. Keep the surface clean and dry, and use a dry and soft cloth to clean the painted surface.
3. Wet cloth with neutral detergent and wipe to remove stubborn stains and dirt.
4. Use only mild neutral detergent.
5. When the carbon brushes run out, please renew the brushes following the guide line in this booklet or
consult with the professionals.
Correct Disposal of this product
.
③
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncon-
trolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental
safe recycling.
AEOLIAN
Circuit Diagram
Parameters
Product Name
AEOLIAN
TD-901GT
Rated Voltage
220V -240V/ 50Hz
110V -120V/ 60Hz
100V/ 60Hz
Blow Force
895g
726g
726g
Rated Current
12.7A
19.1A
15A
Maximum Power
1500W
2800W
2100W
Maximum Wind Speed
①
90m/s
73m/s
73m/s
Minimum Wind Speed
27m/s
Heating Power
600W
600W
Maximum Temperature
52℃
(Environmental Temperature at 32℃)
Noise
79dbA
78dbA
78dbA
(on back of the dryer at 1m)
Noise
86dbA
85dbA
85dbA
(on top of the dryer at 0.5m)
Net Weight
4.75kg
4.1kg
4.1kg
Gross Weight
5.5kg
4.9kg
4.9kg
Product Dimension
340×160×210mm
(Flexible Hose not Included)
Packing Dimension
450×300×230mm
(L×W×H)
0
Class
N
Remarks:
①. We cannot find any anemoscope to measure the real wind speed of this TD-901GT dryer, between
the another single motor dryer CYCLONE in our line and TD-901GT.
1.The parameters are tested with 2.5m long flexible hose and Φ16mm round nozzle.
2.We may not publish formal notice in written form when the parameters changed after new improvements.
3.The manufacturing standards and testing stands subject to TOEX company standard: TXPS-ALPD-0901(T)-2012.
Safety Instruction
1. Pet dryer needs a single outlet which is at least 10A and has ground wire for itself. Please connect pet dryer
with a correct outlet and do not share with other appliances.
2. Before switch on or turn off the power every time, please adjust the wind and temperature to the lowest, this
can extend the lifetime of the machine.
3. Do not insert pins or any metal things into the clearance of the machine, otherwise that would be easy to get
an electric shock and short circuit.
4. Do not use a cloth or bag to stop the diffuser or foam filter; otherwise it would damage the machine.
5. If the machine has been used for some time and a malfunction occurs, you must ask the professional
person to repair it. Do not disassemble by yourself.
6. If the power cord is damaged, discontinue use and have repaired by a professional.
7. Please keep children away when you operate the machine.
8. Do not hit the housing with fierce shock or drop the machine from high, which will damage the frame and motor.
9. Cardiopath or people with pacemaker are forbidden to use this machine.
10. Please hold the nozzle and hose firmly before turning the machine on, or the hose may wiggle and cause injury.
11. Must plug hose into the front cap connector before turning the machine on.
12. It's strictly forbidden to touch the components in the front cap connector with hand or any other objects in
any situation.
13. Apliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
14. Children should be supervised to ensure that they do not play with the appliance.
15. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
MOT1
Not equipped in
SWT
TH
SW2
100V model
VR2
SW1
VR1
R2
R1
DB3
TRIAC
C1
C2
G
L