Aries Embedded MCVEVP 빠른 시작 매뉴얼 - 페이지 20

{카테고리_이름} Aries Embedded MCVEVP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aries Embedded MCVEVP 20 페이지.

MCV Quick Start Guide, Release 2

1. Click 'Auto-Detect' in the left hand panel

2. In the 'Select Device' dialog, select '5CSXFC2C6' or '5CSXFC6C6' (depending on the SoM) and click OK

3. In the top part of main pane, right-click '5CSXFC2C6' or '5CSXFC6C6' (depending on the SoM) and select

'Change File'

4. In the 'Select New Programming File', select the ﬁle 'Recovery-C2.sof' or 'Recovery-C6.sof' (depending on

the SoM).

5. In the top part of main pane, check the 'Program/Conﬁgure' box for the '5CSXFC2C6' or '5CSXFC6C6'

(depending on the SoM)

6. Click 'Start' in the left hand panel

Note

Please contact ARIES Embedded to obtain your version of the correct rescue image for MCV.

4.6 Use USB Mass Storage

After the programming ﬁnished, the board comes up and immediately starts USB Mass Storage mode. The USB Mass

Storage is backed by the eMMC integrated on the MCV SoM. The host PC will detect a new USB storage device,

which can be used as a regular USB stick. The data on the eMMC can be read and written using usual methods.

Installation of a new software image from the host PC to the MCVEVK is performed using the usual:

=> dd if=software_image.img of=/dev/sdX

Chapter 4. Recovery