Aries Embedded MCVEVP Skrócona instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Płyta główna Aries Embedded MCVEVP. Aries Embedded MCVEVP 20 stron.

MCV Quick Start Guide, Release 2

1. Click 'Auto-Detect' in the left hand panel

2. In the 'Select Device' dialog, select '5CSXFC2C6' or '5CSXFC6C6' (depending on the SoM) and click OK

3. In the top part of main pane, right-click '5CSXFC2C6' or '5CSXFC6C6' (depending on the SoM) and select

'Change File'

4. In the 'Select New Programming File', select the ﬁle 'Recovery-C2.sof' or 'Recovery-C6.sof' (depending on

the SoM).

5. In the top part of main pane, check the 'Program/Conﬁgure' box for the '5CSXFC2C6' or '5CSXFC6C6'

(depending on the SoM)

6. Click 'Start' in the left hand panel

Note

Please contact ARIES Embedded to obtain your version of the correct rescue image for MCV.

4.6 Use USB Mass Storage

After the programming ﬁnished, the board comes up and immediately starts USB Mass Storage mode. The USB Mass

Storage is backed by the eMMC integrated on the MCV SoM. The host PC will detect a new USB storage device,

which can be used as a regular USB stick. The data on the eMMC can be read and written using usual methods.

Installation of a new software image from the host PC to the MCVEVK is performed using the usual:

=> dd if=software_image.img of=/dev/sdX

Chapter 4. Recovery