Aeon Labs AEO_SES3_EU 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Aeon Labs AEO_SES3_EU에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs AEO_SES3_EU 5 페이지. Inline smart energy switch
페이지 인쇄Value
2
4
8
Report Type send in Reporting Group 3 (Parameter Number 103, Parameter Size 4)
Defines the type of report sent for the Reporting Group 3.
Value
2
4
8
Set 111‐113 to default (Parameter Number 110, Parameter Size 1)
Value
0
1
Send Interval for Reporting Group 1 (Parameter Number 111, Parameter Size 4)
Defines the time interval when the defined report of Reporting Group 1 is sent out.
Value
0 — 65535
Send Interval for Reporting Group 2 (Parameter Number 112, Parameter Size 4)
Defines the time interval when the defined report of Reporting Group 2 is sent out.
Value
0 — 65535
Send Interval for Reporting Group 3 (Parameter Number 113, Parameter Size 4)
Defines the time interval when the defined report of Reporting Group 3 is sent out.
0 — 32000
Partner ID (Parameter Number 200, Parameter Size 1)
Value
0
1
Enable/disable Configuration Locked (Parameter Number 252, Parameter Size 1)
Value
0
Deactivate configurationlock (Default)
1
Activate configurationlock
Command Classes
Supported Command Classes
CRC-16 Encapsulation (version 1)
Z-Wave Plus Information (version 2)
Manufacturer Specific (version 2)
Version (version 2)
Security (version 1)
Binary Switch (version 1)
All Switch (version 1)
Scene Activation (version 1)
Scene Actuator Configuration (version 1)
Meter (version 3)
Association Group Information (version 1)
Mutlisensor-Report
Meter Report for Watt
Meter Report for kWh
Mutlisensor-Report
Meter Report for Watt
Meter Report for kWh
Set to default (Default)
nothing
Interval (Default 720)
Interval (Default 720)
Value
Aeon Labs Standard (Default)
AT&T
Description
Description
Description
Description
Description
Interval
Description
Description
Description