Dimplex SP420 설치 및 운영 지침 매뉴얼 - 페이지 2

{카테고리_이름} Dimplex SP420에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex SP420 9 페이지. Dimplex wall fires installation and operating instructions
Dimplex SP420에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 사용자 설명서 (8 페이지), 설치 및 운영 지침 매뉴얼 (8 페이지)

페이지 인쇄

Installation

Do not connect appliance until properly fixed to the wall

and the Instruction leaflet is read fully.

This model is designed to be permanently fixed to a wall at a

minimum height of 300mm.

The wall bracket must be fitted horizontally and the cable

routed to the bottom right of the heater as in Fig 1.

566

outline of

wall fire

Recommended Fixing Dimensions - Fig. 2

A height of 600mm from bottom of heater to floor is

recommended for optimum viewing of fuel bed (see Fig. 2

for recommended fixing dimensions).

For optimum viewing mark the top four screw fixing positions

on wall in accordance with the recommended fixing

dimensions - see Fig. 2.

Drill holes with a 6mm drill bit. Fix the wall bracket using the

four plugs and screws provided - see Fig 3.

Carefully lift the heater up ensuring that the top rear ledge of

heater engages the wall bracket and is sitting centrally

positioned. - see Fig 4 (b).

Rotate the bottom fixing bracket down. - see Fig 4 (c).

Gently bring the heater level with the wall. - see Fig 4 (d).

outline of wall

480

fixing bracket

240

558

1158

600

wall

plugs

fixing

bracket

screws

Fig. 3

see

detail '1'

wall bracket

slide down over

bracket, ensure

that ledge of

appliance engages

behind wall

bracket and is

central

bring level

with wall

Mark the bottom hole position (see Fig. 5), remove the heater

ensuring that the bottom fixing bracket is rotated up.

Drill and fit wall plug.

Refit the heater to the wall fixing bracket (i.e. follow steps as

in Fig. 4 a,b,c and d above) and rotate the bottom fixing

bracket down again and use the screw provided to

permanently fix the heater in place.

The heater should not be connected until the instruction leaflet

is read fully.

lift appliance

ledge

above wall

fixing bracket

wall

ensure ledge

bracket

at back of

fire engages

wall bracket

Detail '1'

rotate bottom

fixing bracket

down from its

transit position

Fig. 4

mark hole

centre with

pencil

Fig. 5