Dimplex XLS24N 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Dimplex XLS24N에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex XLS24N 8 페이지. Ultra-slim storage heaters
Dimplex XLS24N에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 운영 지침 (4 페이지), 운영 지침 (4 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

5. Stand heater on its feet and remove all packaging

pieces.

7. If the ﬂ oor is carpeted then the carpet should be slit and

underlay cut away to allow the feet to rest ﬁ rmly on the

ﬂ oor. Carpet gripper must be locally removed so that the

feet may rest in a level position.

9. Remove wall ﬁ xing bracket from heater by removing

the screws at each end.

6. Position heater against wall in intended ﬁ nal position,

taking note of the minimum ﬁ xing dimensions.

If ﬁ tted, the Dimplex storage heater shelf should be ﬁ xed

in accordance with the instructions enclosed with the shelf.

8. Having prepared, where necessary, the ﬂ oor, the

position of the wall bracket should be marked on the wall.

10. Four ﬁ xing positions must be chosen for the 24N, three

for the 18N and two for the 12N . Mark the positions for the

ﬁ xing holes - two at the extreme ends and the others spaced

evenly between them. Remove the bracket from the wall,

drill the holes in the positions marked, and insert suitable

ﬁ xings detailed in Steps 11 and 12. Secure the wall bracket

to the wall.