Dimplex XLS24N 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Dimplex XLS24N에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex XLS24N 8 페이지. Ultra-slim storage heaters
Dimplex XLS24N에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 운영 지침 (4 페이지), 운영 지침 (4 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

11. Solid Brick/High Density Block Walls. (See step 12

if walls are low density block.) These must be drilled

and plugged with the No. 10 size plastic inserts provided.

The correct size of drill (8mm) should be used and the

hole should be drilled to a depth of 15mm greater that the

length of the plastic insert so that the ﬁ xing is made below

the plaster layer.

12. Low Density Block Walls. A specialised ﬁ xing, such

as the Uniﬁ x LB70, should be employed following closely

the manufacturer's instructions.

Panelled Internal Walls. Here it is best to locate the

studding and use No. 10 size woodscrews. Where it is

not possible to locate the studding use type M5 Rawlplug

INTERSETS on securely fastened plasterboard panelling.

For other wall panel materials the wall panel manufacturer

should be consulted for details of suitable wall ﬁ xing

devices.

13. If left hand cable connection is required, the mains

lead must be secured to the back of the heater using ties

provided in the ﬁ xing kit. Ensure sufﬁ cient spare cable is

available to make the mains connection.