Aeon Labs Aeotec Z-Stick Gen5 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Aeon Labs Aeotec Z-Stick Gen5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs Aeotec Z-Stick Gen5 11 페이지. Z-wave usb adapter
Aeon Labs Aeotec Z-Stick Gen5에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지)
페이지 인쇄
4.4 Installation and Maintenance Application (IMA) feature
When the Z-Stick is in Serial API-Mode and acts a primary controller, it can measure the network health
for each device in the network. The different colour of LED indicates the communication quality between
the Z-Stick Controller and devices in the network.
Install the IMA tool software first (note: the IMA tool can be downloaded from here:
http://www.aeotec.com/support). Select the node device and then click the IMA test button to start the
IMA test between the Central Controller and the node devices. Your IMA tool client will receive the test
result and use different colour of LED icon to indicate the network health level, its colour will be changed
follow with the change of network health level.
4.5 Configuration
4.4.1 Set
Command
The Set Command used to set the value of configuration parameter(s), command format:
Serial API: (refer to the below form)
HOST->ZW: REQ | 0xf2 |
ZW->HOST: RES | 0xf2 | RetVal
REQUEST:
7
6
Default
Parameter Number (8 bits)
Parameter Number
| size |
5
4
Command = 0xF2
Parameter Number
Size
Value 1(MSB)
Value 2
.........
Value n(LSB)
Value
3
2
1
0