Aeon Labs Aeotec Z-Stick Gen5 Посібник із швидкого старту - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Адаптер Aeon Labs Aeotec Z-Stick Gen5. Aeon Labs Aeotec Z-Stick Gen5 11 сторінок. Z-wave usb adapter
Також для Aeon Labs Aeotec Z-Stick Gen5: Посібник (17 сторінок)
Друкувати сторінку
4.4 Installation and Maintenance Application (IMA) feature
When the Z-Stick is in Serial API-Mode and acts a primary controller, it can measure the network health
for each device in the network. The different colour of LED indicates the communication quality between
the Z-Stick Controller and devices in the network.
Install the IMA tool software first (note: the IMA tool can be downloaded from here:
http://www.aeotec.com/support). Select the node device and then click the IMA test button to start the
IMA test between the Central Controller and the node devices. Your IMA tool client will receive the test
result and use different colour of LED icon to indicate the network health level, its colour will be changed
follow with the change of network health level.
4.5 Configuration
4.4.1 Set
Command
The Set Command used to set the value of configuration parameter(s), command format:
Serial API: (refer to the below form)
HOST->ZW: REQ | 0xf2 |
ZW->HOST: RES | 0xf2 | RetVal
REQUEST:
7
6
Default
Parameter Number (8 bits)
Parameter Number
| size |
5
4
Command = 0xF2
Parameter Number
Size
Value 1(MSB)
Value 2
.........
Value n(LSB)
Value
3
2
1
0