Aeon Labs Aeotec Z-Stick Gen5 매뉴얼 - 페이지 5

{카테고리_이름} Aeon Labs Aeotec Z-Stick Gen5에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs Aeotec Z-Stick Gen5 17 페이지. Z-wave usb adapter
Aeon Labs Aeotec Z-Stick Gen5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄
Aeon Labs Aeotec Z-Stick Gen5 매뉴얼
Affix your Sensor plates to a surface.
The Mounting plates can be affixed using screws or double-
sided tape.
If you are using screws, attach both mounting plates to the
respective surface using the two 20mm screws provided.
If you are using double-sided tape, wipe the two surfaces clean
of any oil or dust with a damp towel. When the surface has
completely dried, peel one side of the tape back and attach it
to the corresponding section on the rear side of the mounting
plates.