Aeon Labs Aeotec Z-Stick Gen5 Manuel - Sayfa 5

Adaptör Aeon Labs Aeotec Z-Stick Gen5 için çevrimiçi göz atın veya pdf Manuel indirin. Aeon Labs Aeotec Z-Stick Gen5 17 sayfaları. Z-wave usb adapter
Ayrıca Aeon Labs Aeotec Z-Stick Gen5 için: Hızlı Başlangıç Kılavuzu (11 sayfalar)

Sayfayı Yazdır
Aeon Labs Aeotec Z-Stick Gen5 Manuel
Affix your Sensor plates to a surface.
The Mounting plates can be affixed using screws or double-
sided tape.
If you are using screws, attach both mounting plates to the
respective surface using the two 20mm screws provided.
If you are using double-sided tape, wipe the two surfaces clean
of any oil or dust with a damp towel. When the surface has
completely dried, peel one side of the tape back and attach it
to the corresponding section on the rear side of the mounting
plates.