Pioneer AppRadio SPH-DA01 운영 매뉴얼 - 페이지 19

{카테고리_이름} Pioneer AppRadio SPH-DA01에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AppRadio SPH-DA01 32 페이지. Display unit appradio
Pioneer AppRadio SPH-DA01에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 사용자를 위한 중요 정보 (24 페이지), 설치 매뉴얼 (40 페이지), 펌웨어 업데이트 (4 페이지)

페이지 인쇄

Setting rear view camera

The following two functions are available. The

rear view camera feature requires a separately

sold rear view camera (e.g. ND-BC4). (For de-

tails, consult your dealer.)

Rear view camera

This product features a function that automati-

cally switches to the full-screen image of the

rear view camera installed on your vehicle.

When the gearstick is in the REVERSE (R) po-

sition, the screen automatically switches to

full-screen rear view camera image.

Camera for Rear view mode

Rear view can be displayed at all times (e.g.

when monitoring an attached trailer, etc.).

Please be aware that with this setting, camera

image is not resized to fit, and that a portion of

what is seen by the camera is not viewable.

CAUTION

Check to make sure settings for rear view camera

displays a mirror reversed image.

p Immediately verify whether the display

changes to a rear view camera image when

the gearstick is moved to REVERSE (R)

from another position.

p When the screen changes to full-screen

rear view camera image during normal

driving, switch to the opposite setting in

"Rear Camera".

Press the Home button to display the

Home screen.

Tap

on the Home screen.

Tap [General].

Tap

Tap [Rear Camera].

You can select the following polarity:

! OFF (default):

Select when the rear view camera is not

connected.

! Normal:

Displays the rear view camera image with-

out change.

Select "Normal" in the following case:

! When the rear view camera is con-

nected to display a mirror reversed

image.

! When the polarity of the connected lead

is positive while the gearstick is in the

REVERSE (R) position

! Normal(GND):

Displays the rear view camera image with-

out change.

Select "Normal(GND)" in the following

case:

! When the rear view camera is con-

nected to display a mirror reversed

image.

! When the polarity of the connected lead

is negative while the gearstick is in the

REVERSE (R) position

! Mirror:

Displays the rear view camera image in mir-

ror reverse.

Select "Mirror" in the following case:

! When the rear view camera is con-

nected to display a normal image.

! When the polarity of the connected lead

is positive while the gearstick is in the

REVERSE (R) position

! Mirror(GND):

Displays the rear view camera image in mir-

ror reverse.

Select "Mirror(GND)" in the following case:

! When the rear view camera is con-

nected to display a normal image.

! When the polarity of the connected lead

is negative while the gearstick is in the

REVERSE (R) position

Chapter

Engb