Pioneer AppRadio SPH-DA01 운영 매뉴얼 - 페이지 21

{카테고리_이름} Pioneer AppRadio SPH-DA01에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AppRadio SPH-DA01 32 페이지. Display unit appradio
Pioneer AppRadio SPH-DA01에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 사용자를 위한 중요 정보 (24 페이지), 설치 매뉴얼 (40 페이지), 펌웨어 업데이트 (4 페이지)

페이지 인쇄
Pioneer AppRadio SPH-DA01 운영 매뉴얼
Customising preferences
6
Tap
or
to adjust the level of the
equaliser band.
You can set the level of the equalisation band
between "–15" and "15".
7
Tap
or
to select the desired Q fac-
tor.
You can select the following Q factors:
Low: 1 — 1.25 — 1.5 — 2
Mid: 0.5 — 0.75 — 1 — 1.25
p Q factor cannot be adjusted when you se-
lect "High".
p If you tap [Reset], the setting values of equali-
ser curve is returned to the default settings.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1
Display the audio settings screen.
2
Tap [FAD BAL].
3
Tap
or
to adjust front/rear speaker
balance.
You can set the front/rear speaker balance
from "–24" to "+24".
4
Tap
or
to adjust left/right speaker
balance.
You can set the left/right speaker balance from
"–24" to "+24".
Setting subwoofer gain
1
Display the audio settings screen.
2
Tap [FAD BAL].
3
Tap
or
to adjust the subwoofer
gain.
You can set the subwoofer gain from "–12" to
"+12".
Customising the general
settings
1
Press the Home button to display the
Home screen.
2
Tap
on the Home screen.
3
Tap [General].
The general settings screen appears.
4
Tap the item that you want to change
the setting.

Display settings

1
Display the general settings screen.
2
Tap
.
Make the following settings.
Rear Camera
You can switch the polarity of the rear view camera.
= For details, refer to Chapter 7.

Screen OFF

You can set the time when the screen is blacked out.
! OFF (default):
The screen does not black out.
! 10 sec:
The screen is blacked out after 10 seconds.
! 20 sec:
The screen is blacked out after 20 seconds.

Dimmer

You can link the brightness of the screen to operation
of the vehicle's headlights.
! ON (default):
Dims the screen when the vehicle's headlights
are turned on.
! OFF:
The screen is not dimmed even when the vehicle's
headlights are turned on.

LCD brightness

You can adjust the brightness of display.
Each time you tap
or
level. "5" to "1" is displayed as the level is increased or
decreased.
increases or decreases the
Engb
Chapter
08
21