Pioneer DEH-10MP 소유자 매뉴얼 - 페이지 11
{카테고리_이름} Pioneer DEH-10MP에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-10MP 26 페이지.
페이지 인쇄
Section
(--.:::O~p~e:.:r-=a=ti~n~g~t=-:h:..::..::is=--u=n:...=-:i=--=t
)
CD
•
Depending on the version of iTunes® used to
write MP3 files onto a disc, comment informa-
tion may not be correctly displayed.
-
iTunes is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.
• The sampling frequency shown in the display
may be abbreviated. ~
Audio Adjustments
Using balance adjustment
Fader/balance setting creates an ideal listen-
ing environment in all occupied seats.
1
Press AUDIO to select FAD.
2
Press. or • to adjust front/rear speak-
er balance.
FAD F15
to
FAD R15 is displayed.
• FAD 0 is the proper setting when only two
speakers are used.
3
Press
~
or
~
to adjust left/right speaker
balance.
BAL L15
to
BAL R15 is displayed.
• To return to the normal display, press
BAND.
Using the eClualizer
There are six stored equalizer settings such as
DYNAMIC, VOCAL, NATURAL, CUSTOM,
FLAT and POWERFUL that can easily be re-
called at any time.
• CUSTOM is an adjusted equalizer curve
that you create.
• When FLAT is selected no supplement or
correction is made to the sound.
•
Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
DYNAMIC-VOCAL-NATURAL-CUSTOM
--FLAT-POWERFUL
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
Adjusting basslmidltreble
You can adjust the bass/mid/treble level.
1
Press AUDIO to select BASS/MID/
TREBLE.
2
Press. or • to adjust the level.
+6 to
-6
is displayed as the level is increased
or decreased.
• To return to the normal display, press
BAND.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press. or. to turn loudness on or off.
• You can also turn loudness on or off by press-
ing and holding
EQ.
3
Press .... or
~
to select a desired level.
LOW (Iow)-HI (high)
• To return to the normal display, press
BAND.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sou rces.
• Settings are based on the FM volume level,
which remains unchanged.
• The AM volume level can also be adjusted
with source level adjustments.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Press AUDIO to select SLA.
-
m
::s
cc
-
Cii"
::J"
En
(ill