Pioneer Elite PRO-R06U 교육 매뉴얼 - 페이지 19

{카테고리_이름} Pioneer Elite PRO-R06U에 대한 교육 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite PRO-R06U 47 페이지. Pioneer 6th generation plasma media receivers

Trap Switch Location (Media Receiver)

Outline and Notes

For video data transmission from the Media Receiver to the PDP-436U and PDP-506U-series Plasma Displays, digital signals

are used. Therefore, this unit adopts the HDCP (High-bandwidth Digital Content Protection) system for copyright protection.

This unit is also provided with a detection switch (TRAP switch) that will prohibit the unit from being turned on again "if the

upper plate of the unit is accidentally opened," in order to prevent the panel technology from being leaked out.

The TRAP switch is disabled while the unit is turned off.

When performing internal diagnosis of the PDP, fix the switch to the OFF position using adhesive tape before turning on the

unit. After servicing, be sure to remove the adhesive tape.

To Release an Activated Trap Switch:

1. Enter Factory Service mode

2. Select initialize mode

3. Hold down Display Key on Remote

for 5 seconds.

TRAP switch