Pioneer Elite PRO-R06U Training Manual - Page 19

Browse online or download pdf Training Manual for Receiver Pioneer Elite PRO-R06U. Pioneer Elite PRO-R06U 47 pages. Pioneer 6th generation plasma media receivers

Print Page

Trap Switch Location (Media Receiver)

Outline and Notes

For video data transmission from the Media Receiver to the PDP-436U and PDP-506U-series Plasma Displays, digital signals

are used. Therefore, this unit adopts the HDCP (High-bandwidth Digital Content Protection) system for copyright protection.

This unit is also provided with a detection switch (TRAP switch) that will prohibit the unit from being turned on again "if the

upper plate of the unit is accidentally opened," in order to prevent the panel technology from being leaked out.

The TRAP switch is disabled while the unit is turned off.

When performing internal diagnosis of the PDP, fix the switch to the OFF position using adhesive tape before turning on the

unit. After servicing, be sure to remove the adhesive tape.

To Release an Activated Trap Switch:

1. Enter Factory Service mode

2. Select initialize mode

3. Hold down Display Key on Remote

for 5 seconds.

TRAP switch