Pioneer Elite SC-05 사용 설명서 - 페이지 23

{카테고리_이름} Pioneer Elite SC-05에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite SC-05 38 페이지. Audio/video multi-channel receiver, advanced mcacc pc display application software
Pioneer Elite SC-05에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

How to Interpret the Graphs (Continued)

Displaying reverb characteristics after calibration

To display the graph of your listening area's reverb characteristics with the equalization performed by this

receiver (after calibration), you'll need to select the "EQ ON" option from the "Reverb Measurement" menu.

Using this graph, you can confirm the effects of MCACC calibration for your listening area.

Connect the receiver to your PC with a RS-232C cable.

See

page 7

for more on connecting the RS-232C cable.

Select the "EQ Professional" option for "Manual MCACC", and perform with

"Reverb Measurement" set to "EQ OFF".

(See

page 8

or page 50 of the receiver's Operating Instructions.)

The reverb characteristics before equalization are measured.

If the "Full Auto MCACC" operation has never been performed, conduct the "Full Auto MCACC"

operation here.

(See page 10 of the receiver's Operating Instructions.)

Receive and save the data by selecting "Output PC" from "MCACC Data Check".

When you receive and save this information on your PC, you will be able to see the graph of your

listening area's reverb characteristics before calibration.

Select "Reverb Measurement" from the receiver's "EQ Professional" menu and

choose the "EQ ON".

(See

page 8

or page 50 of the receiver's Operating Instructions.)

Measure the room's reverb characteristics after equalization with the microphone at the same position as

when the "Full Auto MCACC" operation was performed. The measurements are performed with the EQ

values stored in the MCACC memory selected on the receiver, so before measuring the reverb

characteristics, select the MCACC memory to be measured after equalization.

Continue