Pioneer Elite SC-27 사용 설명서 - 페이지 10

{카테고리_이름} Pioneer Elite SC-27에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite SC-27 36 페이지. Audio/video multi-channel receiver, advanced mcacc pc display application software
Pioneer Elite SC-27에 대해서도 마찬가지입니다: 사양 (2 페이지), 펌웨어 업데이트 지침 (5 페이지), 펌웨어 업데이트 지침 (4 페이지)

페이지 인쇄

1. Troubleshooting

Application Operations (Continued)

Select the type of data to be received, then select "OK".

Select "Reverb" to receive the data for the room's reverb characteristics, "Group Delay" to receive the

data for the speakers' group delay characteristics and "MCACC Parameters" to receive the data for the

various MCACC parameters (measurements results).

Data transmission starts.

When reception finishes the received data appear.

Note

• The data used to display the reverberation characteristics graph (Reverb), the group delay characteristics

graph (Group Delay) and the MCACC parameters are not deleted even when the receiver's power is

turned off. However, for the data used to display the reverberation characteristics graph (Reverb) and the

group delay characteristics graph the data stored in the receiver is overwritten when the reverberations

are measured again. If you wish to display graphs of multiple sets of data, use the data transfer function to

store the data on a computer each time you measure the reverberations.

• In order to avoid malfunction, after the completion of the data transmission, unplug the RS-232C cable

connecting your PC and the receiver.

Type of data

Continue