Pioneer Elite SC-89 사용 설명서 - 페이지 7

{카테고리_이름} Pioneer Elite SC-89에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite SC-89 8 페이지. Dolby atmos-enabled speakers setup
Pioneer Elite SC-89에 대해서도 마찬가지입니다: 참조 매뉴얼 (45 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄

9. Using the

, and

make the following changes:

- Set "SW" to "SW1 PLUS" for 1 Subwoofer or

- Set "SW" to "SW1+2 PLUS" for 2 Subwoofers

- Set "Front" and "Center" to "SMALL"

- Set "TFw" (Top Forward) to "Dolby Sp".

- Set "TMd (Top Middle) to "NO"

- Set "TBw" (Top Backward) to "Dolby Sp"

- Set "Surr" to "SMALL"

- Set "X.OVER" to "80Hz"

Run MCACC to calibrate the speaker outputs for the best sound

1. Place the microphone at the desired location

2. Plug the microphone into the front mic jack of

the AVR

3. Confirm and change if necessary the settings

shown below.

4. "Speaker System : 5.2.4"

5. "EQ Type : Symmetry"

6. "MCACC : M1.Memory 1"

7. "Dolby Enabled Speaker : TFw+TBw"

buttons, Select and

Note: The ceiling speakers will change to the up

firing Dolby Atmos-enabled Speakers in the

image on the right side of the screen.

10. Press the HOME MENU button to exit.

8. "SP to ceiling :" Measure the distance from top

of speaker to ceiling and enter it here using the

and

buttons. Example: 6' 02"

9. "Measurement type : Expert"

10. Select "Start", press the ENTER button, and

leave the sound field area. If possible, stay in

view of the TV screen as error messages and

directions may appear.

11. After MCACC completes the calibrations, the

AVR will return to the "HOME MENU".