Pioneer VSX-422-S 사용 설명서 - 페이지 31
{카테고리_이름} Pioneer VSX-422-S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-422-S 36 페이지. Pioneer av receiver operating instructions
Pioneer VSX-422-S에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (45 페이지)
페이지 인쇄
6
6
The Pre Out Setting
Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
•
Default setting: Surr. Back
1
Select 'Pre Out Setting' from the Home Menu.
Home Menu
4.Pre Out Setting
1.Auto MCACC
Pre Out
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
Ret urn
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using /.
•
Surr. Back – Connect the surround back speaker.
•
Height – Connect the front height speaker.
3
When you're finished, press RETURN.
You return to the Home Menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
•
Default setting: 6H
1
Select 'Auto Power Down' from the Home Menu.
Home Menu
5.Auto Power Down
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
Ret urn
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
•
You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the Home Menu.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the front
Surr. Back
panel display.
1
Select 'FL Demo Mode' from the Home Menu.
Hom e Me nu
Return
1. Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
2
Choose ON or OFF for the demo display.
3
When you're finished, press RETURN.
You return to the Home Menu.
6H
Return
6.FL Demo Mode
FL Demo
ON
Return
R e turn
31
The HDMI Setup menu
If your TV supports an audio return channel (ARC) function,
connect your TV and this unit with an HDMI cable and the TV
audio will be inputted into this unit via the HDMI terminal
without the need for an audio cable to be connected.
Important
®
•
Use a High Speed HDMI
Cable when using the ARC
function. The ARC function may not operate properly with
other HDMI cables.
1
Select 'HDMI Setup' from the Home Menu.
H ome Me nu
7.HDMI Setup
1.Auto MCACC
ARC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
Re turn
2
Choose the 'ARC' setting you want.
When a TV supporting the HDMI Audio Return Channel
function is connected to the receiver, the sound of the TV
can be input via the HDMI terminal.
•
ON – The TV's sound is input via the HDMI terminal.
•
OFF – The TV's sound is input from the audio input
terminals other than HDMI inputs.
3
When you're finished, press RETURN.
You return to the Home Menu.
Home Menu
OFF
Return