Pioneer VSX-605S 사용 설명서 - 페이지 29

{카테고리_이름} Pioneer VSX-605S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-605S 37 페이지. Audio/video stereo receiver
Pioneer VSX-605S에 대해서도 마찬가지입니다: 사용 설명서 (37 페이지)

페이지 인쇄

@ If you press the SURR EDIT button on a function operation

display, display switches to "SURROUND EDIT" indications

for the currently selected surround

mode.

(Press the EXIT

button to return to the original function operation display.)

® Onthe SURROUND EDIT display, you can adjust ieveis, switch

to the center mode, and adjust delay time.

{When using DOLBY PRO LOGIC)

LEVEL ADJUSTMENT

Example: When using DOLBY PRO LOGIC"

1. Press the CENTER MODE

button to select the Center

Mode. (Refer to page 6) +1

fa NORMAL —®e WIDE

———*

PHANTOM

7 T

2. Press the TEST TONE button to switch the test tone on.

The test tone is output from each of the speakers in the

following order,

' Front Left ~~~»

Center ie

Surround (Rear} «———-——-— Front Right

3. Adjust so that the volume level is the same from each of

the speakers.

Use the CENTER LEVEL +, ~ buttons to adjust the center

speaker volume Jevel. +3

Use the REAR

LEVEL

+, - buttons to adjust the rear

speakers volume level. *4

4. Press the TEST TONE button to switch the test tone OFF.

NOTE:

*1 You can select the CENTER MODE when using DOLBY PRO

LOGIC SURROUND and DOLBY 3CH LOGIC.

When using DOLBY 3CH LOGIC, you can switch between

NORMAL and WIDE settings.

*2 When the CENTER MODE button is PHANTOM position, no

test tone is output from the center speaker,

*3 Only when using DOLBY PRO LOGIC SURROUND and DOLBY

3CH LOGIC, can you adjust the CENTER LEVEL.

*4 When using DOLBY 3CH LOGIC, the REAR speakers are not

used.

[ IS CG System Control |

You can piily. "adjust 'delay time for DOLBY PRO LOGIC

SURROUND, SIMULATED SURROUND and ARENA.

Each time you press the +, - buttons, delay time changes as

follows:

18 msg <————* 20 ms <---> 25 ms +—---» 30 ms

The standard setting is 20 ms, but you can select any setting of

your choice.