Pioneer VSX-605S Operating Instructions Manual - Page 29

Browse online or download pdf Operating Instructions Manual for Stereo Receiver Pioneer VSX-605S. Pioneer VSX-605S 37 pages. Audio/video stereo receiver
Also for Pioneer VSX-605S: Operating Instructions Manual (37 pages)

Pioneer VSX-605S Operating Instructions Manual
@ If you press the SURR EDIT button on a function operation
display, display switches to "SURROUND EDIT" indications
for the currently selected surround
mode.
(Press the EXIT
button to return to the original function operation display.)
® Onthe SURROUND EDIT display, you can adjust ieveis, switch
to the center mode, and adjust delay time.
{When using DOLBY PRO LOGIC)
LEVEL ADJUSTMENT
j
Example: When using DOLBY PRO LOGIC"
1. Press the CENTER MODE
button to select the Center
Mode. (Refer to page 6) +1
fa NORMAL —®e WIDE
———*
PHANTOM
7 T
2. Press the TEST TONE button to switch the test tone on.
The test tone is output from each of the speakers in the
following order,
' Front Left ~~~»
Center ie
Surround (Rear} «———-——-— Front Right
3. Adjust so that the volume level is the same from each of
the speakers.
®
Use the CENTER LEVEL +, ~ buttons to adjust the center
speaker volume Jevel. +3
@
Use the REAR
LEVEL
+, - buttons to adjust the rear
speakers volume level. *4
4. Press the TEST TONE button to switch the test tone OFF.
NOTE:
*1 You can select the CENTER MODE when using DOLBY PRO
LOGIC SURROUND and DOLBY 3CH LOGIC.
When using DOLBY 3CH LOGIC, you can switch between
NORMAL and WIDE settings.
*2 When the CENTER MODE button is PHANTOM position, no
test tone is output from the center speaker,
*3 Only when using DOLBY PRO LOGIC SURROUND and DOLBY
3CH LOGIC, can you adjust the CENTER LEVEL.
*4 When using DOLBY 3CH LOGIC, the REAR speakers are not
used.
[ IS CG System Control |
You can piily. "adjust 'delay time for DOLBY PRO LOGIC
SURROUND, SIMULATED SURROUND and ARENA.
Each time you press the +, - buttons, delay time changes as
follows:
18 msg <————* 20 ms <---> 25 ms +—---» 30 ms
The standard setting is 20 ms, but you can select any setting of
your choice.
29
<ARB7053>