Pioneer A-107 사용 설명서 - 페이지 5

{카테고리_이름} Pioneer A-107에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-107 12 페이지. Stereo
Pioneer A-107에 대해서도 마찬가지입니다: 서비스 매뉴얼 (8 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

CONNECTING THE SPEAKER CORDS

1. Strip off the vinyl covering and twist the tip of the

wire core.

10mm

Twist the wire core

2. Loosen the knob and insert the wire core into the

terminal hole.

3. Tighten the knob to fix the wire core in place.

NOTE:

Do not allow any of the cord conductors to protrude from the

terminals or touch any other conductors. Malfunctioning or

breakdowns may occur when conductors come into contact

with each other.

Speaker Impedance

The speaker systems used should have a rated impedance in

the range of 6 - 16 Ω.

CONNECTING THE INPUT/OUTPUT

CORDS

Connect the white plug to the L (left) channel, and the red plug

to the R (right) channel. Be sure to push the plugs securely.

White plug

(Except for U.K., European, Australian and

NewZealand models)

AC OUTLETS (SWITCHED TOTAL 100 W MAX)

Power supplied through these outlets is turned on and off

by the amplifier's POWER switch. Total electrical power

consumption of connected equipment should not exceed

100 W.

AC OUTLETS (UNSWITCHED 100 W MAX)

Power flows continually to this outlet, regardless of whether

the amplifier is switched to ON. Electrical power consump-

tion of the connected equipment should not exceed 100

NOTES:

÷ The equipment should be disconnected by removing

the power plug from the wall socket when not in regular

use, e.g., when on vacation.

÷ Do not connect appliances with high power consump-

tion such as heaters, irons, or television sets to the AC

OUTLETS in order to avoid overheating or fire risk.

CAUTION:

DO NOT CONNECT A MONITOR OR TV SET TO

THIS UNIT'S AC OUTLETS.

CONNECTIONS

Left channel

Right channel

Red plug

OUTLETS

SWITCHED

TOTAL

100 W MAX

UNSWITCHED

100 W MAX