Pioneer A-107 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer A-107에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-107 12 페이지. Stereo
Pioneer A-107에 대해서도 마찬가지입니다: 서비스 매뉴얼 (8 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

CONTENTS

FEATURES ......................................................................... 3

INSTALLATION .................................................................. 3

CONNECTIONS .................................................................. 4

PANEL FACILITIES ............................................................. 6

FEATURES

Direct Energy MOS Power Amp

Pioneer introduces amp circuitry featuring HEX power

MOS FET devices for high performance. Together with

Pioneer's original Wide Range Linear Circuit technology,

this helps achieve reducing power consumption, while

maintaining the power of current models.

In terms of performance, it contributes to flat damping

factor characteristics across the audio spectrum, and im-

proved power linearity.

INSTALLATION

LOCATION

Install the unit in a well-ventilated location where it

will not be exposed to high temperatures or humid-

ity.

Do not install the unit in a location which is exposed to direct

rays of the sun, or near hot appliances or radiators. Excessive

heat can adversely affect the cabinet and internal compo-

nents. Installation of the unit in a damp or dusty environment

may also result in a malfunction or an accident. (Avoid

installation near cookers etc., where the unit may be exposed

to oily smoke, steam or heat.)

Do not install the unit on a tottered stand, nor on an unstable

or inclined surface.

OPERATIONS ..................................................................... 9

TROUBLESHOOTING ...................................................... 11

SPECIFICATIONS ............................................................. 12

High-power Output of 40W+40W/8Ω(DIN)

Wide-Range Linear Circuit

This new current feedback circuit assures improved oper-

ating stability for flat output impedance and stable driving

of speakers across the full range of frequencies.

Low power consumption design.

Complementary capacitor pair.

VENTILATION

÷ When installing this unit, make sure to leave space around

the unit for ventilation to improve heat radiation (at least 60

cm at top, 10 cm at rear, and 30 cm at each side). If not

enough space is provided between the unit and walls or

other equipment, heat will build up inside, interfering with

performance or causing malfunctions.

÷ Do not place on a thick carpet, bed, sofa or fabric having a

thick pile. Do not cover with fabric or other covering.

Anything that blocks ventilation will cause internal tem-

perature to rise, which may lead to breakdown or fire

hazard.