Pioneer CT-F10 사용 설명서 - 페이지 35

{카테고리_이름} Pioneer CT-F10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CT-F10 40 페이지. Stereo cassette deck
Pioneer CT-F10에 대해서도 마찬가지입니다: 서비스 매뉴얼 (28 페이지), 추가 운영 지침 (21 페이지), 서비스 매뉴얼 (28 페이지)

페이지 인쇄

You can protect an important recording against accidental

erasure by breaking the erase-protect tab(s) with a small

screwdriver.

If you want to re-record on an erase-protected cassette, cover

the space left by the broken tab with self-adhesive tape.

Note: If you're using Type II (High/CrO2) tapes, make sure

you don't also cover the tape-type detection holes.

To clean this unit, wipe with a soft, dry cloth. For stubborn

dirt, wet a soft cloth with a mild detergent solution made by

diluting one part detergent to 5 or 6 parts water, wring well,

then wipe off the dirt. Use a dry cloth to wipe the surface dry.

Do not use volatile liquids such as benzene and thinner which

may damage the surfaces.

If you need to move the unit, first switch it off and unplug

from the wall outlet. Avoid lifting or moving the unit during

playback or recording.

The CD pickup lens should not become dirty in normal use,

but if for some reason it should malfunction due to dirt or

dust, consult your nearest Pioneer authorized service center.

Although lens cleaners for CD players are commercially

available, we do not recommend using them since some may

damage the lens.

To maintain the recording/playback quality of the tape deck,

use a commercially available wet-type cassette head cleaner.

Avoid using dry-type cassette head cleaners.

Some cassette head cleaners are not designed

to work with auto-reverse decks and may become jammed in

the mechanism — ask your Pioneer authorized service centre

for details.

After using the head cleaner, leave the unit for 2–3 minutes

before playing a tape. This will give any excess cleaning fluid

a chance to dry.

The recording/playback head in the tape deck gradually

becomes magnetized after long periods of use. Playback and

recording quality will suffer as a result, with a lack of treble

and increased noise. To avoid the problem, we recommend

using a head demagnetizer at regular intervals. These are

available from any good audio dealer.

When using a head demagnetizer, be sure to turn the volume

right down and unplug any headphones to avoid damaging

the unit or the speakers. For further details, refer to the

instructions that came with the head demagnetizer.

The satellite speakers are magnetically shielded. This means

that they can safely be placed near a TV or monitor without

distorting the picture.

The subwoofer is not magnetically shielded. If it is placed very

near a TV or monitor, you may see color distortion in the

picture. Switch off the TV for about 30 minutes and move the

subwoofer further away from the television to solve the

problem.

You can use the satellite speakers with or without the grilles.