Pioneer CT-F10 사용 설명서 - 페이지 36

{카테고리_이름} Pioneer CT-F10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CT-F10 40 페이지. Stereo cassette deck
Pioneer CT-F10에 대해서도 마찬가지입니다: 서비스 매뉴얼 (28 페이지), 추가 운영 지침 (21 페이지), 서비스 매뉴얼 (28 페이지)

페이지 인쇄

The door open sensor on the front of the CD tuner has two

operating modes, as well as an off setting.

switch between menu options using 4 and

¢; select the option by pressing

•

– (default) the door will open

automatically, even if a disc is currently playing.

•

– the door will only open automati-

cally if no disc is playing.

•

– switches off the automatic door feature

The system goes back into standby.

By default, when you press

the disc compartment, you'll hear a beep. If you would prefer

not to, here's how to switch it off:

switch between menu options using 4 and

¢; select the option by pressing

The system goes back into standby.

to open or close

Depending on the component that you connect to the

auxiliary inputs, it's possible that the signal level will be too

high for this system to play properly without the sound

distorting. If you notice distortion when listening to the

auxiliary component, try switching the attenuator on.

switch between menu options using 4 and

¢; select the option by pressing

The default setting is

The system goes back into standby.

If you selected

, the level of the input signal is

reduced to prevent distortion.

You can adjust the brightness of the display to suit the

lighting conditions of the room. For example, in a brightly lit

room you'd probably want the display brighter than in a room

with low lighting.

switch between menu options using 4 and

¢; select the option by pressing

There are five levels of brightness (UK model default is 4; non-

UK model default is 5).

The system goes back into standby.

• When switched on, the blue light on the disc compartment

door and on the front of the tape deck changes (3 levels)

with the display brightness.

(attenuate off).