Pioneer GM-D1004 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Pioneer GM-D1004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-D1004 18 페이지. Class d four-channel amplifier
Pioneer GM-D1004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (45 페이지)
Setting the unit
What's what
Right side
1
Left side
3
To adjust the switch, use a flathead screwdri-
ver if needed.
1 Power indicator
The power indicator lights up to indicate
power ON.
2 INPUT SELECT (input select) switch
Select 2CH for two-channel input and 4CH
for four channel input.
3 LPF (low-pass filter)/HPF (high-pass fil-
ter) select switch
Switch the settings based on the connected
speaker.
! When the Subwoofer is connected:
Select LPF. This eliminates high range
frequency and outputs low range fre-
quency.
2
! When the full range speaker is con-
nected:
Select HPF or OFF. HPF eliminates low
range frequency and output high range
frequency. OFF outputs the entire fre-
quency range.
! Switch the LPF/HPF select switches after
turning down the volume of the head unit.
! Protective function included to automati-
cally prevent malfunction of the unit and/or
speakers due to excessive output, improper
use or improper connection.
! Even though the sound is optimally ad-
justed, when outputting high volume
sound etc., this function may cuts off the
output for a few seconds as a normal func-
tion. However, the output is restored when
the volume of the head unit is turned down.
! When the sound output cuts off, turn down
the volume of the head unit.
! Despite turning down the volume of the
head unit, the unit sound still cuts out peri-
odically. In such cases, please contact the
nearest authorized Pioneer Service
Station.
Section
02
5
En