Pioneer GM-D1004 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Pioneer GM-D1004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-D1004 18 페이지. Class d four-channel amplifier
Pioneer GM-D1004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (45 페이지)

페이지 인쇄

Section

Connecting the units

Connection of power cord

and speaker

CAUTION

Connect the yellow cord to the terminal linked to

the fuse unit of the car.









1 Fuse 15 A × 1

2 To power cord input

3 Left

4 Right

5 Front speaker

6 Rear speaker

7 White

8 White/black

9 Gray

a Gray/black

b Green

c Green/black

d Violet









e Violet/black

f Black (chassis ground)

Connect to a clean, paint-free metal location.

g Yellow

Connect to the constant 12 V supply terminal.

h Blue/white

Connect to system control terminal of the car

stereo.

Note

INPUT SELECT (input select) switch must be set.

For details, see Setting the unit on page 5.

Before connecting the

amplifier

WARNING

! Secure the wiring with cable clamps or adhe-

sive tape. To protect the wiring, wrap sections

in contact with metal parts in adhesive tape.

! Never cut the insulation of the power supply

to feed power to other equipment. Current ca-

pacity of the wire is limited.

CAUTION

! Never shorten any wires, the protection circuit

may malfunction.

! Never wire the speaker negative cable directly

to ground.

! Never band together multiple speaker s nega-

tive cables.

! If the system remote control wire of the ampli-

fier is connected to the power terminal via the

ignition switch (12 V DC), the amplifier will re-

main on with the ignition whether the car

stereo is on or off, which may exhaust battery

if the engine is at rest or idling.

! Install and route the Power cord, ground wire,

speaker wires and the amplifier as far away as

possible from the antenna, antenna cable and

tuner.