Pioneer Premier PRS-A900 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Pioneer Premier PRS-A900에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Premier PRS-A900 44 페이지. Bridgeable four-channel power amplifier
Pioneer Premier PRS-A900에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지), 서비스 매뉴얼 (41 페이지)

페이지 인쇄

Installation

Example of installation on the floor

mat or on the chassis

1. Place the amplifier where it is to be

installed. Insert the supplied tap-

ping screws (4 mm × 18 mm) into

the screw holes. Push on the screws

with a screwdriver so they make

marks where the installation holes

are to be located.

2. Drill 2.5 mm (1/8 in.) diameter holes

at the point marked, and install the

amplifier, either on the carpet or

directly to the chassis.

Tapping screw

(4 mm × 18 mm)

Floor mat or chassis

Drill a 2.5 mm (1/8 in.)

diameter hole

Replacing the terminal cover

1. Align the unit and terminal cover,

and insert the screw.

2. Tighten the screw with a 4 mm

hexagonal wrench.

Screw

Terminal Cover

Changing the Direction of the Badge

1. To remove the badge, loose screws

by using a 2 mm hexagonal wrench.

2. Change the direction of badge, and

then tighten the screws with a

hexagonal wrench.

Screw

Badge