Pioneer Premier PRS-A900 Kullanıcı El Kitabı - Sayfa 14
Amplifikatör Pioneer Premier PRS-A900 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer Premier PRS-A900 44 sayfaları. Bridgeable four-channel power amplifier
Ayrıca Pioneer Premier PRS-A900 için: Kullanıcı El Kitabı (17 sayfalar), Servis Kılavuzu (41 sayfalar)
Sayfayı Yazdır
Installation
Installation
Example of installation on the floor
mat or on the chassis
1. Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm × 18 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
2. Drill 2.5 mm (1/8 in.) diameter holes
at the point marked, and install the
amplifier, either on the carpet or
directly to the chassis.
Tapping screw
(4 mm × 18 mm)
Floor mat or chassis
13
Drill a 2.5 mm (1/8 in.)
diameter hole
Replacing the terminal cover
1. Align the unit and terminal cover,
and insert the screw.
2. Tighten the screw with a 4 mm
hexagonal wrench.
Screw
Terminal Cover
Changing the Direction of the Badge
1. To remove the badge, loose screws
by using a 2 mm hexagonal wrench.
2. Change the direction of badge, and
then tighten the screws with a
hexagonal wrench.
Screw
Badge