Pioneer PRS-D4200F - Premier Amplifier 소유자 매뉴얼 - 페이지 17
{카테고리_이름} Pioneer PRS-D4200F - Premier Amplifier에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PRS-D4200F - Premier Amplifier 20 페이지. Bridgeable four-channel power amplifier
Pioneer PRS-D4200F - Premier Amplifier에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 서비스 매뉴얼 (38 페이지)
Specifications
Power source
14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system
Negative type
Current consumption
28 A (at continuous power, 4 n)
Average current drawn*
10 A (4 n for four channels)
20 A (4 n for two channels)
20 A (2 n for four channels)
l:'.~,.....
')" A ..
~"
rU1>1;
.JV
t"\
A ..
Dimensions
301 (W) mm x 57 (H) mm x 213 (D) mm
[12 (W) in x 2-1/4 (H) in x 8-3/8 (D) in]
Weight
3.5 kg (7.71bs.) (Leads for wiring not included)
Maximum power output
150 W x 4 (4 n) / 600 W x 2 (4 n)
Continuous power output
75 Wx 4 (at 14.4 V, 4 n, 20 Hz to 20 kHz 1.0% THD)
300 W x 2 (at 14.4 V, 4 n, 1kHz 1.0% THO)
150 W x 4 (at 14.4 V, 2 n, 1kHz 1.0% THO)
Load impedance
4 n (2 n to 8
n
allowable)
Frequency response
10 Hz to 50 kHz
(+0
dB, -3 dB)
Signal-to-noise ratio
100 dB (IHF-A network)
Distortion
0.005 % (10 W, 1kHz)
Separation
70 dB (1 kHz)
60 dB (100 Hz to 10 kHz)
Low pass filter
Cut off frequency: 40 Hz to 500 Hz
Cut off slope: -12 dB/oct
High pass filter
Cut off frequency: 40 Hz to 500 Hz
Cut off slope: -12 dB/oct
Gain control
RCA: 400 mV to 6.5 V
Speaker: 1.6 V to 26 V
Maximum input level/impedance
RCA: 6.5 V / 22 ill
Speaker: 26 V /90 kn
Power output
75 W RMS x 4 channels
(4 n and
~
I %THD+N)
300 W RMS x 2 channels
(4 n and
~
1 %THD+N)
150 W RMS x 4 channels
(2 n and
~
I %THD+N)
Signal-lo-noise ratio
80 dBA (Reference: 1W into 4 n)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*
Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
•