Pioneer SA-7800 사용 설명서 - 페이지 10
{카테고리_이름} Pioneer SA-7800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SA-7800 12 페이지.
Pioneer SA-7800에 대해서도 마찬가지입니다: 서비스 매뉴얼 (30 페이지)
페이지 인쇄
OPERATIONS
Volume control
Loudness switch
Speaker selector
Subsonic filter switch
Tone switch
PRIOR TO SWITCHING POWER ON
Before
switching the power on, set the various
controls as follows:
. Set the subsonic filter switch to OFF.
. Set the volume control to ©.
. Set the tape duplicate switch to OFF.
. Set the tape monitor switch to OFF.
. Set the tone switch to OFF.
Set the balance control to the center position.
. Set the loudness switch to OFF.
. Set the muting switch to OFF.
. Set the mode selector to STEREO.
. Set the tone controls to the center positions.
.Set the speaker selector to the appropriate
position according to the employed terminals.
PLAYING RECORDS
1. Set the function selector to PHONO.
2. Operate the turntable to play the record.
3. Adjust the volume with the volume control.
4. Set the tone
switch to ON
in line with your
preference and adjust the tone with the tone
controls.
FOOD
ANOahWNH
ee
Precautions when playing records.
e Lower the stylus gently on to the surface of the
record. It is a good idea to set the muting switch
to —20dB
or to turn the volume
down
when
lowering the stylus onto the record.
10
Tone controls
Tape duplicate switch
'Tape monitor switch
Function selector
Mode selector
Balance control
Muting switch
e Set the subsonic
filter switch to 15Hz when
there
is a great deal
of noise
in the
low-
frequency
region or when
the bass speaker's
diaphragm moves even though no sound can be
heard during a performance.
e Do
not cause
the turntable to vibrate while a
record is being played since this will cause the
stylus to jump and scratch the record. Do not
turn off the power
if the stylus is still tracing
grooves on the record.
LISTENING TO THE BROADCAST
1. Set the function selector to TUNER.
2. Operate
the tuner
and tune
in to the desired
station.
3. Adjust the volume with the volume control.
4. Set the tone
switch
to ON
in line with your
preference and adjust the tone with the tone
controls.
USING THE AUX JACKS
1. Set the function selector to AUX.
2. Operate the audio component
which you have
connected to the AUX jacks.
3. Adjust the volume with the volume control.
4. Set the tone
switch
to ON
in line with your
preference and adjust the tone with the tone
controls.