Pioneer VSA-1000 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer VSA-1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSA-1000 35 페이지. Av digital surround amplifier
Pioneer VSA-1000에 대해서도 마찬가지입니다: 사용 설명서 (35 페이지)

페이지 인쇄

FEATURES

¢ BUILT-IN DOLBY PRO LOGIC SURROUND CIRCUIT

AND 5 POWER AMPLIFIER MODES.

Enjoy the presence and the expansive effect of surround playback. Four

different surround effect and 3-step delay times are available.

¢ TOTAL OF 290 W HIGH OUTPUT POWER (FTC)

[POWER IN]

Surround mode:

100 W + 100 W (front)

20 Hz — 20 kHz, 0.005 % **89

30 W + 30 W (rear) 20 Hz ~ 20 kHz, 0.08 % **82

30 W (center) 20 Hz — 20 kHz, 0.08 % **8Q

**Measured by Audio Spectrum Analyzer.

AV PROGRAMMABLE REMOTE CONTROL UNIT

With the attached remote control unit you can operate any Pioneer audio

or video component bearing the fal mark. And with additional learning

functions a whole AV surround system including TV and VCR from other

makers can be controlled. (Some makers' remote control systems,

however, are not suitable for programming.)

NOTE:

The keys of this remote control unit can't operate equipment that does

not possess the corresponding functions or does not have remote

control capability.

* VCR 1 RECORDING SELECTOR FUNCTION

You can record on VCR 1 from VCR2, VCR 3, VDP, VIDEO 1 or VIDEO

2, regardless of other functions.

* S JACKS

There are S (separate) video jacks for VCR 1, 2 (input, output), VDP

(input) and VIDEO OUT {output).

BEFORE USING THE UNIT

* Remote control unit...1

Audio: TAPE 1/DAT 1, TAPE 2/DAT 2 (MONITOR), LINE, CD, TUNER,

PHONO

Video: VCR 1, VCR 2, VCR 3, VDP, TV, VIDEO 1, VIDEO 2, VIDEO

ADAPTOR

¢ VIDEO SIGNAL SELECTOR

As audio and video sources can be freely combined, you can make your

original BGV easily.

¢ MUTUAL COPYING IS POSSIBLE BETWEEN VIDEO

CASSETTE

RECORDERS

(VCR)

Copying can be carried out freely between VCR 1, VCR 2, and VCR 3.

(Copying can be performed between VCR

1 and VCR 2 using the

S-VIDEO connectors)

« ACOUSTIC MEMORY

Up to 5 BASS and TREBLE settings can be preset.

Remaining time is displayed during the sleep opeartion.

* SOUND FIELD MEMORY FUNCTION

Surround mode, Balance, Delay time, and Acoustic memory are among

the 5 presets possible with this function.

¢ SUPERIMPOSE

FUNCTION

The present operational condition is indicated with letters on the TV

screen. A blue background is displayed when no video signal is input.

(A gray background is displayed if an S-VIDEO connector is used when

there is no video signal input.)

¢ MULTI-ROOM REMOTE JACK

The optional MR-100 Multiroom remote control unit can be connected

to the Multi-room remote IN jack.

¢ LRO3 (AM-4) alkaline dry cell battery...4

* Template added...2