Pioneer VSA-1000 Kullanım Talimatları Kılavuzu - Sayfa 3
Amplifikatör Pioneer VSA-1000 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSA-1000 35 sayfaları. Av digital surround amplifier
Ayrıca Pioneer VSA-1000 için: Kullanım Talimatları Kılavuzu (35 sayfalar)
Sayfayı Yazdır
FEATURES
¢ BUILT-IN DOLBY PRO LOGIC SURROUND CIRCUIT
AND 5 POWER AMPLIFIER MODES.
Enjoy the presence and the expansive effect of surround playback. Four
different surround effect and 3-step delay times are available.
¢ TOTAL OF 290 W HIGH OUTPUT POWER (FTC)
[POWER IN]
Surround mode:
100 W + 100 W (front)
20 Hz — 20 kHz, 0.005 % **89
30 W + 30 W (rear) 20 Hz ~ 20 kHz, 0.08 % **82
30 W (center) 20 Hz — 20 kHz, 0.08 % **8Q
**Measured by Audio Spectrum Analyzer.
AV PROGRAMMABLE REMOTE CONTROL UNIT
With the attached remote control unit you can operate any Pioneer audio
or video component bearing the fal mark. And with additional learning
functions a whole AV surround system including TV and VCR from other
makers can be controlled. (Some makers' remote control systems,
however, are not suitable for programming.)
NOTE:
The keys of this remote control unit can't operate equipment that does
not possess the corresponding functions or does not have remote
control capability.
* VCR 1 RECORDING SELECTOR FUNCTION
You can record on VCR 1 from VCR2, VCR 3, VDP, VIDEO 1 or VIDEO
2, regardless of other functions.
* S JACKS
There are S (separate) video jacks for VCR 1, 2 (input, output), VDP
(input) and VIDEO OUT {output).
BEFORE USING THE UNIT
© Accessories.
* Remote control unit...1
© PLENTIFUL AV INPUTS
Audio: TAPE 1/DAT 1, TAPE 2/DAT 2 (MONITOR), LINE, CD, TUNER,
PHONO
Video: VCR 1, VCR 2, VCR 3, VDP, TV, VIDEO 1, VIDEO 2, VIDEO
ADAPTOR
¢ VIDEO SIGNAL SELECTOR
As audio and video sources can be freely combined, you can make your
original BGV easily.
¢ MUTUAL COPYING IS POSSIBLE BETWEEN VIDEO
CASSETTE
RECORDERS
(VCR)
Copying can be carried out freely between VCR 1, VCR 2, and VCR 3.
(Copying can be performed between VCR
1 and VCR 2 using the
S-VIDEO connectors)
« ACOUSTIC MEMORY
Up to 5 BASS and TREBLE settings can be preset.
© 90/60/30-MINUTE SLEEP TIMER FUNCTION
Remaining time is displayed during the sleep opeartion.
* SOUND FIELD MEMORY FUNCTION
Surround mode, Balance, Delay time, and Acoustic memory are among
the 5 presets possible with this function.
¢ SUPERIMPOSE
FUNCTION
The present operational condition is indicated with letters on the TV
screen. A blue background is displayed when no video signal is input.
(A gray background is displayed if an S-VIDEO connector is used when
there is no video signal input.)
¢ MULTI-ROOM REMOTE JACK
The optional MR-100 Multiroom remote control unit can be connected
to the Multi-room remote IN jack.
¢ LRO3 (AM-4) alkaline dry cell battery...4
* Template added...2
3
<ARB1177>