Pioneer CDJ-200 사용 설명서 - 페이지 6

{카테고리_이름} Pioneer CDJ-200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDJ-200 20 페이지. Compact disc player
Pioneer CDJ-200에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

BEFORE OPERATING (CONNECTIONS)

CONNECTIONS

Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet.

1. Connecting to a DJ mixer (DJM-600, DJM-500, DJM-300, DJM-3000, DJM-909, DJM-707

(sound output and CONTROL connector))

Using the supplied audio cables, connect the white plug into the L (left) terminal and the red plug to the R (right) terminal.

Connect the supplied control cable to enable control of the unit from the mixer for fader start play and back cue.

When connecting to a DJ mixer (DJM-600)

÷ When connecting to DJM-300 and DJM-500, connect as shown in the accompanying illustration.

÷ When connecting to DJM-909 and DJM-707, connect CH-1 CD with A PLAYER, CH-2 CD with B PLAYER using the supplied

audio cables.

÷ When connecting to DJM-3000, connect A PLAYER to LINE 1 of CH-1, and B PLAYER to LINE 3 of CH-2.

÷ When connecting to a audio mixer other than the ones listed above, connect the unit's AUDIO OUT terminal to the mixer's line

in terminal, or the AUX terminal (* do not connect to the PHONO terminal, since distortion or improper operation may occur).

2. Connecting control cable for relay play

Alternating playback can be automatically performed when the CONTROL connectors of the two units are connected with the

supplied control cable. (P.15)

Supplied

audio cable

CDJ-200

Supplied control cable

Supplied

control cable

Supplied audio

cable

CDJ-200