Pioneer CDJ-200 Operating Instructions Manual - Page 6
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CDJ-200. Pioneer CDJ-200 20 pages. Compact disc player
Also for Pioneer CDJ-200: Operating Instructions Manual (20 pages)
Print Page
BEFORE OPERATING (CONNECTIONS)
CONNECTIONS
Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connecting to a DJ mixer (DJM-600, DJM-500, DJM-300, DJM-3000, DJM-909, DJM-707
(sound output and CONTROL connector))
Using the supplied audio cables, connect the white plug into the L (left) terminal and the red plug to the R (right) terminal.
Connect the supplied control cable to enable control of the unit from the mixer for fader start play and back cue.
When connecting to a DJ mixer (DJM-600)
÷ When connecting to DJM-300 and DJM-500, connect as shown in the accompanying illustration.
÷ When connecting to DJM-909 and DJM-707, connect CH-1 CD with A PLAYER, CH-2 CD with B PLAYER using the supplied
audio cables.
÷ When connecting to DJM-3000, connect A PLAYER to LINE 1 of CH-1, and B PLAYER to LINE 3 of CH-2.
÷ When connecting to a audio mixer other than the ones listed above, connect the unit's AUDIO OUT terminal to the mixer's line
in terminal, or the AUX terminal (* do not connect to the PHONO terminal, since distortion or improper operation may occur).
2. Connecting control cable for relay play
Alternating playback can be automatically performed when the CONTROL connectors of the two units are connected with the
supplied control cable. (P.15)
6
Supplied
audio cable
CDJ-200
CDJ-200
Supplied control cable
Supplied control cable
Supplied
control cable
Supplied audio
cable
CDJ-200
CDJ-200