Pioneer CDJ-2000NXS2 사용 설명서 - 페이지 28

{카테고리_이름} Pioneer CDJ-2000NXS2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDJ-2000NXS2 43 페이지. Multiplayer
Pioneer CDJ-2000NXS2에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 빠른 시작 매뉴얼 (4 페이지), 연결 매뉴얼 (7 페이지)

페이지 인쇄

1. Troubleshooting

Slip hot cue

1 Press the [SLIP] button.

The mode switches to the slip mode.

2 Press and hold the [HOT CUE] (A to H) button.

Hot cueing begins.

Normal playback of the sound playing in the background continues even

while the [HOT CUE] (A to H) button is pressed.

The [SLIP] button flashes in beat with the sound playing in the

background.

! At the point 4 beats after hot cueing began, the slip hot cue mode is

automatically canceled and normal playback of the sound that was

playing in the background resumes.

3 Release your finger from the [HOT CUE] (A to H)

button.

If the [HOT CUE] (A to H) button is released before 4 beats elapse from

the starting position of the hot cue, normal playback of the sound play-

ing in the background resumes.

Canceling the slip mode

Press the [SLIP] button.

The slip mode is canceled.

! The slip mode is also canceled when a track is loaded.

Playing from the touched position

on the waveform display

Touch the waveform display with your finger to easily play the audio

starting from the touched position. Move your finger while touching the

waveform display to quickly move to the desired position.

You can perform track search by touching the waveform display only in

the following conditions.

! In the pause mode

! While the jog dial is being pressed with the jog mode set to VINYL

Touch the waveform display during pause.

The current playing position on the playing address display moves to the

touched point.

! If you move your finger quickly, the playing address display may not

be shown properly.

Using the beat sync function

When beat sync is turned on, the BPM and beat position of tracks played

on this unit can automatically be synchronized with the DJ player con-

nected by PRO DJ LINK that is set as the sync master.

! The beat sync function does not operate for tracks that have not be

analyzed with rekordbox.

1 Press the [BEAT SYNC MASTER] button on the DJ

player you want to set as the sync master.

Set the DJ player you want to be the sync master.

When the beat sync function is on, the BPM display on the DJ player set

as the sync master changes to orange.

! rekordbox (Mac/Windows) can also be set as the sync master.

= For the procedure to set rekordbox (Mac/Windows) as a sync

master, see the rekordbox (Mac/Windows) user's manual.

2 Press the [BEAT SYNC] button.

The BPM and beat position of the currently playing track are synchro-

nized to the sync master.

! During synchronization, tempo control with the tempo slider is

disabled and the playing speed display switches to the tempo slider

position's BPM display, displayed in gray.

Changing the DJ player set as the sync

master

The sync master can be changed to another DJ player connected by

PRO DJ LINK as described below.

! Change or pause the track on the DJ player set as the sync master.

! Press the [BEAT SYNC MASTER] button on the DJ player set as the

sync master.

! Press the [BEAT SYNC MASTER] button on a DJ player other than

the one set as the sync master.

Starting playback from the same

playback position as the track loaded in

the DJ player set as the sync master

You can start playback from the same playback point as the track loaded

in the DJ player set as the sync master using the DJ player not set as the

sync master by the following methods.

! Load the track loaded in the DJ player set as the sync master to the

DJ player not set as the sync master.

! Press the [BEAT SYNC/INST.DOUBLE] button of the DJ player not

set as the sync master for over 1 second.

Canceling synchronization

Press the [BEAT SYNC/INST.DOUBLE] button.

! If the synchronized playing tempo (BPM) and the slider posi-

tion's tempo (BPM) do not match, the synchronized playing tempo is

maintained and tempo control with the tempo slider remains dis-

abled. Normal operation is restored when the position of the tempo

slider is moved to the synchronized playing tempo position.

! If the pitch is bent using the DJ player not set as the sync master, the

synchronization is canceled and the [BEAT SYNC/INST.DOUBLE]

button flashes.

Adjusting the beat grid

The enlarged waveform displays the beat grid with red lines. The beat

grid can be adjusted by the following procedure.

1 Press the rotary selector for at least 1 second.

The mode switches to the [GRID ADJUST] mode.

2 When the rotary selector is turned, the beat grid is

adjusted.

You can adjust from the menu screen by touching the [MENU/UTILITY]

button.

! [RESET]: Resets the adjusted beat grid.

! [SNAP GRID(CUE)]: Moves the first beat to the position of the

currently set cue.

! [SHIFT GRID]: Reflects the results adjusted during synchroniza-

tion (pitch bend, etc.) on the beat grid.

3 Press the rotary selector for at least 1 second.

Return to [ZOOM] mode.