3Com EtherLink 3C905C-TX-M 빠른 매뉴얼 - 페이지 11

{카테고리_이름} 3Com EtherLink 3C905C-TX-M에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com EtherLink 3C905C-TX-M 15 페이지. Network interface card

rn_body.SML Page 9 Wednesday, June 9, 1999 7:56 AM

3 Click OK.

The Insert Disk dialog box appears.

4 Open the pull-down menu and select:

c:\windows\options\cabs

5 Click OK.

Files are copied.

If you are prompted for the EtherCD, click OK, make sure

that the drive letter of the CD-ROM drive (for example, d:\)

appears in the dialog box, and then click OK.

You are prompted for the Windows 98 CD.

6 Remove the EtherCD, insert the Windows 98 CD,

and then click OK.

Files are copied. You are prompted to restart the PC.

7 Remove the Windows 98 CD, and then click Yes to

restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to the next section,

"Verifying Successful

NIC is properly installed.

After Windows restarts, double-click the Network icon

in the Windows Control Panel and make sure that

the correct conﬁguration settings are selected for your

network environment. Contact your system administrator

for assistance.

Windows NT 4.0

To install the network driver:

1 Turn on the power to the PC.

2 Double-click the My Computer icon, then the

Control Panel icon, and then the Network icon.

The Network window appears.

3 Click the Adapters tab.

If networking has not been installed on your PC before,

Windows NT asks you if you want to install networking.

Click Yes. See the WINNT.TXT ﬁle located on the EtherCD

or your Windows NT documentation for instructions.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Installing the Network Driver

Installation," to conﬁrm that the