3Com EtherLink 3C905C-TX-M 빠른 매뉴얼 - 페이지 7
{카테고리_이름} 3Com EtherLink 3C905C-TX-M에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com EtherLink 3C905C-TX-M 15 페이지. Network interface card
페이지 인쇄
rn_body.SML Page 5 Wednesday, June 9, 1999 7:56 AM
If you are planning to install the Remote Wake-Up cable,
choose an empty PCI slot that is close to the matching
Remote Wake-Up connector on the PC motherboard.
Remote Wake-Up is supported by the following NICs:
3C905C-TX-M
I
3C905B-TX
I
3C905B-TX-M
I
3C905B-COMBO
I
3C905B-FX
I
3C900B-FL
I
If you have a 3C905C-TX-M NIC and your PC is compliant
with PCI 2.2, Remote Wake-Up is automatically enabled
through the PCI bus. The Remote Wake-Up cable is
not required.
6 Carefully insert the NIC in the PCI slot.
Figure 1 Installing the NIC
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installing the NIC in the PC
1 Remove slot cover
2 Insert NIC
PCI slots
5