Aeotec Water Sensor 7 Pro 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Aeotec Water Sensor 7 Pro에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Water Sensor 7 Pro 8 페이지. Water sensor
Aeotec Water Sensor 7 Pro에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지), 사용자 설명서 (9 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (9 페이지)
페이지 인쇄
2
Parameter 6: Command Sent to Devices of Association Group 2
This parameter defines which commands is sent to 2nd Association Group
Size: 1 Byte, Default Value: 2
Setting
0
1
2
Parameter 7: BASIC command value sent to 2nd Association Group on On event
This is the BASIC command value sent in case of On event.
Size: 1 Byte, Default Value: 255
Setting
0 - 99
255
Parameter 8: BASIC command value sent to 2nd Association Group on Off event
This is the BASIC command value sent in case of Off event.
Size: 1 Byte, Default Value: 0
Setting
0 - 99
255
Parameter 9: Time Delay of On command frame
On command is sent after a delay defined in this parameter.
Size: 2 Byte, Default Value: 0
Setting
0 - 32400
Parameter 10: Time Delay of Off command frame
Off command is sent after a delay defined in this parameter.
Size: 2 Byte, Default Value: 0
Setting
0 - 32400
Parameter 11: Delay of Tamper Alarm Cancellation
Time a tamper alarm is delayed.
Size: 2 Byte, Default Value: 0
Setting
0 - 32400
Parameter 12: Reporting Tamper Alarm Cancellation
Switch after Water Leakage Stop
Description
On
Off
On and Off
Description
Value
Value
Description
Value
Value
Description
seconds
Description
seconds
Description
seconds