Aeotec AEOEZW116 매뉴얼 - 페이지 9

{카테고리_이름} Aeotec AEOEZW116에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec AEOEZW116 16 페이지. Single nano switch with measuring
Aeotec AEOEZW116에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄
Aeotec AEOEZW116 매뉴얼
Setting
0
1
2
Parameter 80: To set which notification would be sent to the associated device
To set which notification would be sent to the associated devices (Group 1) when the state of Nano Dimmers load i
Size: 1 Byte, Default Value: 0
Setting
0
1
2
3
4
Parameter 81: To set which notification would be sent to the associated nodes
To set which notification would be sent to the associated nodes in association Group 3 when using the external swi
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 82: To set which notification would be sent to the associated nodes
To set which notification would be sent to the associated nodes in association Group 4 when using the external swi
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 83: Configure the state of LED
Configure the state of LED when it is in 3 modes
Size: 1 Byte, Default Value: 0
http://manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW116
Description
Last status
Always on
Always off
Description
Send Nothing
Send Hail CC
Send Basic CC report
Send Multilevel Switch report
Send Hail CC when using the manual switch to change the load
Description
Send Nothing
Send Basic Set CC
Description
Send Nothing
Send Basic Set CC
30-09-2020 13:25
Pagina 9 van 16