Aeotec Smart Switch 6 사용자 설명서 - 페이지 4

{카테고리_이름} Aeotec Smart Switch 6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Smart Switch 6 12 페이지.
Aeotec Smart Switch 6에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)

1. Decide on where you want your Smart Switch to be placed and plug it into a wall

outlet.

2. If your Z-Stick is plugged into a gateway or a computer, unplug it.

3. Take your Z-Stick to your Smart Switch.

4. Press the Action Button on your Z-Stick.

5. Press the Action Button on your Smart Switch

6. If Smart Switch has been successfully added to your Z-Wave network, its RGB LED

will be solid. If the adding was unsuccessful, the red LED will be on for 2 seconds and then

remain colorful gradient status, repeat the instructions from step 4.

7. Press the Action Button on the Z-Stick to take it out of inclusion mode and then

return it to your gateway or computer.

If you're using a Minimote:

1. Decide on where you want your Smart Switch to be placed and plug it into a wall

socket.

2. Take your Minimote to your Smart Switch.

3. Press the Include button on your Minimote.

4. Press the Action Button on your Smart Switch.