- ページ 4

スイッチ Aeotec Smart Switch 6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec Smart Switch 6 12 ページ。
Aeotec Smart Switch 6 にも：マニュアル (7 ページ)

1. Decide on where you want your Smart Switch to be placed and plug it into a wall

outlet.

2. If your Z-Stick is plugged into a gateway or a computer, unplug it.

3. Take your Z-Stick to your Smart Switch.

4. Press the Action Button on your Z-Stick.

5. Press the Action Button on your Smart Switch

6. If Smart Switch has been successfully added to your Z-Wave network, its RGB LED

will be solid. If the adding was unsuccessful, the red LED will be on for 2 seconds and then

remain colorful gradient status, repeat the instructions from step 4.

7. Press the Action Button on the Z-Stick to take it out of inclusion mode and then

return it to your gateway or computer.

If you're using a Minimote:

1. Decide on where you want your Smart Switch to be placed and plug it into a wall

socket.

2. Take your Minimote to your Smart Switch.

3. Press the Include button on your Minimote.

4. Press the Action Button on your Smart Switch.